2N EasyGate - User Manual - Manual (Page 11)

6
3. EasyGate Status Indication
3.1. Indication LEDs
Name Meaning
Power supply
· Light = EasyGate is powered.
· Flashes once in 2s = HW error, contact the manufacturer.
GSM network
· Light = logged-in to GSM
· Flashes once in 1s = logged-out, SIM card inserted
· Flashes once in 3s = logged-out, SIM card not inserted
· Flashes 4 times quickly = enter your PIN
· Flashes 8 times quickly = enter your PUK
· Flashes quickly continuously = all functions are blocked.
Your SIM doesn’t correspond to the GSM operator lock
Telephone line
· No light = standby
· Flashes quickly = seized line or ringing
· Light = call
· Flashes once in 3s = data connection in progress
On FAX models:
· Flashes 2 times then pause = fax connection in progress;
after power on signalize need of FW upgrade.
· Flashes 3 times then pause = fax connection in progress
3.2. Telephone Line Tones
3.2.1. Operational Tones
The GSM gateway sends tones to the telephone line to indicate the line status. The
tone frequency is 425 Hz.
Dial tone: continuous or morse A :
· EasyGate is registered to GSM network and ready to receive dialing.
Ringing tone:
· The called subscriber's telephone is ringing.
· The GSM network transmits this tone.
Busy tone:
· The busy tone is transmitted in any of the following cases:
§
The SIM card has not been installed.
§
EasyGate is logged-out.
§
EasyGate is logged-in to a foreign network but roaming is disabled.