2N EasyGate - User Manual User Manual

Page 31

Serial number

Function No.:

EasyGate serial number - for information only (cannot be changed). Must be
used for communication with the manufacturer.

GSM operator lock

Function No.:

Refer to GSM & SIM Parameters.

COM enable

Function No.:

With this parameter you can enable/disable the serial interface function. You can
disable communication in the operating mode, maintaining the special
programming mode after power up.
Setting options: YES/NO

Default setting: YES

8.3.6. Initialization

All programmable parameters are arranged in tables according to their functions. You

can initialize either all parameters at once or one table of parameters.

For initialization via a telephone line fill in the function number according to the type

of initialization and enter the service password as the parameter.

Telephone line initialization

Function No.:

Initialization of all parameters necessary for the telephone line function.

Call table initialization

Function No.:

Initialization of all parameters related to dialed telephone number.

Initialization of GSM & SIM

Function No.:

Initialization of all parameters related to the GSM network and SIM card (except
for the PIN code).

SMS input initialization

Function No.:

Initialization of all parameters for SMS sending upon SMS input activation.

Global initialization

Function No.:

Initialization of all EasyGate parameters including the PIN and service password.