2N EasyGate - User Manual - Manual (Page 6)

1
1. EasyGate purpose
1.1. Basic Functions
· The primary purpose of EasyGate is to transmit voice between a GSM network and
an attached FXO-interface terminal (PBX, telephone, answering machine, etc.).
· You can establish data connections (GPRS, CSD), fax connections (PC-FAX) and
send/receive SMS using EasyGate in combination with a PC and appropriate
software.
· You can send an SMS to a pre-programmed number using the SMS sending input.
· Analogue fax transmition on some models.
1.2. Advantages of EasyGate Use
· Call cost cutting – by forwarding GSM calls to EasyGate you save a lot on PSTN –
GSM calls.
· Easy installation – EasyGate is designed for immediate use without programming.
· You get all you need in the delivery – your EasyGate delivery contains all you need
to operate the system (the power supply adapter, telephone cable, PC serial cable,
SMS input connector, CD-ROM with software).
· Solution for sites without telephone lines – such as mountain chalets, exhibitions,
conferences, etc.
· CLIP - EasyGate is equipped with the FSK-based CLIP feature, so if a terminal
capable of receiving the CLIP is used you know the caller‘s number.
· Quick data connection – EasyGate transmits data using the high-speed GPRS
connection (GPRS class 10, max. 85.6 kbps).
· SMS sending input – simply send an SMS to a pre-programmed number by closing
the contact. Recommended for easy supervision, simple securing, etc.
· Radiation hazard minimization – you are not exposed to a direct effect of the
antenna RF electromagnetic field while telephoning as opposed to mobile telephones.
· Full GSM coverage - EasyGate is available in the following versions: dual-band
(900 and 1800MHz), tri-band for European markets (900, 1800 and 1900MHz), and
tri-band for the American market (850, 1800 and 1900MHz).