2N Omega Series - VoIP manual v1.2 - Manual (Page 79)

2N
®
- OMEGA Lite
Ethernet module
User Manual – Ethernet Module
79
www.2n.cz
6.1.6.3. User Module Setting
Push Setup to set the User module parameters.
Trace
Enable/set the following:
•
Trace – enable the creation of the User module LOG communication.
•
Erase trace at start – enable the deletion of the User module LOG
communication upon the XAPI server start.
•
File size limit – limit the LOG file size (*.trc). When the limit is exceeded, the
oldest data are overwritten.
Life
Enter the following:
•
Close at idle longer than – define the idle time after which the application shall
be closed. Most applications are provided with protection and thus retain the
0min = no forced disconnection setting unless provided otherwise.