2N Omega Series - VoIP manual v1.2 - Manual (Page 60)

2N
®
- OMEGA Lite
Ethernet module
User Manual – Ethernet Module
60
www.2n.cz
4.13. Firmware Updating
The firmware updating function helps you update the 2N
®
OMEGA Lite
Ethernet module firmware. Be sure to use the firmware supplied by the module
producer or the producer’s technical support department only.
During firmware updating, new firmware versions with innovated functions are
downloaded.
The firmware file is named root.tgz.gpg and should have approximately 10
MB. The firmware updating process takes 5-10 minutes if you use your LAN and a
delay may occur due to a lower transmission rate if you use the Internet.
Click on the Update firmware item to update the firmware. The firmware
updating dialogue is displayed as shown below.
Push the Browse button to select the path to the firmware file and the Update
button to upload the firmware file into the module.