JLG 60HA ANSI Parts Manual - Manual (Page 11)

3120656 1-3
S
E
C
T
I
O
N
1
F
R
A
M
E
SECTION 1 FRAME
FIGURE 1-1. FRAME, STEERING AND AXLE INSTALLATIONS - 2WD AND 4WD (WITH 2 WHEEL
STEER)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
FRAME, STEERING AND AXLE INSTALLATIONS -
2WD AND 4WD (WITH 2 WHEEL STEER) Ref.
1 2360287 Frame (2WD Fixed Axle) 1
2360297 Frame (2WD Oscillating Axle) 1
Note: Above Frames are for machines with s/n’s up
to 12670 and 12676-12678, 12781, 12686-12688,
12691-12699, 12812-12817, 12819, 12821 and 12823 Ref.
2360304 Frame (2WD Fixed Axle) 1
2360311 Frame (2WD Oscillating Axle) 1
2360312 Frame (4WD Fixed Axle) 1
2360303 Frame (4WD Oscillating Axle) 1
Note: Above Frames are for machines with s/n’s
12671-12675, 12679, 12680, 12689, 12690, 12811,
12818, 12820, 12822, 12824 and up. Ref.
0239679 OSCILLATING AXLE INSTALLATION - 2WD
(OPTIONAL) (PRIOR TO SEPTEMBER 1992) Ref. C
0253120 OSCILLATING AXLE INSTALLATION - 2WD
(OPTIONAL) (SEPTEMBER 1992 TO PRESENT) Ref. A
0250250 OSCILLATING AXLE INSTALLATION - STANDARD
4WD (OPTIONAL) (PRIOR TO SEPTEMBER 1992) Ref. D
0253121 OSCILLATING AXLE INSTALLATION - STANDARD
4WD (OPTIONAL) (SEPTEMBER 1992 TO
PRESENT)
Ref. A
0251522 OSCILLATING AXLE INSTALLATION - CSA 4WD
(OPTIONAL) (PRIOR TO SEPTEMBER 1992) Ref. C
0253122 OSCILLATING AXLE INSTALLATION - CSA 4WD
(OPTIONAL) (SEPTEMBER 1992 TO PRESENT) Ref. A
2 Lockout Cylinder Assembly Options (See Section 5
for Breakdown): 2
1681572 2WD (Prior to September 1992)
1682724 2WD (TUV) (September 1992 to Present)
1681571 4WD (Prior to September 1992)
1682727 4WD (TUV) (September 1992 to Present)
3 3421224 Pin (Bottom) 2
4 3450808 Pin, Cotter 1/4” x 2” 4
5 0641406 Bolt 1/4”-20NC x 3/4” 2
6 4761400 Lockwasher 1/4” 2
7 4751400 Flatwasher 1/4” 2
8 4843269 Pin (Top) 2
9 0641508 Bolt 5/16”-18NC x 1” 2
10 4761500 Lockwasher 5/16” 2
11 4751500 Flatwasher 5/16” 2
12 4842691 Axle Weldment (2WD) 1
4842153 Axle Weldment (4WD) 1