JLG M450 ANSI Parts Manual - Manual (Page 129)

SECTION 4 - PLATFORM
3121128 M450A/E400A/M400AJPnarrow/E450A/E400AJPnarrow/M400A/E450AJ/M 129
FIGURE 4-2. PLATFORM COMPONENTS INSTALLATION (SIDE ENTRY PLATFORM)
ITEM PART NUMBER QTY DESCRIPTION REV
Ref PLATFORM ASSEMBLY WITH GATE
Ref Platform Assembly With Gate (Prior to SN 0300163749)
3510832 Ref 6ft (1.83m) with No Mesh and No Stop (E/M450A Only) (Use
p/n 1001144025) L
3510831 Ref 5ft (1.52m) with No Mesh and No Stop (E/M400A &
E/M450A/AJ) (Use p/n 1001144026) L
3510844 Ref 5ft (1.52m) with No Mesh and With Stop (E/M400AJP Only) D
3510830 Ref 4ft (1.22m) with No Mesh and No Stop (Use p/n 1001144027) M
Ref Platform Assembly With Gate (E/M400) (SN 0300163749
through 0300189901)
Ref Platform Assembly With Gate (E/M450) (SN 0300163749
through 0300189898)
1001144025 Ref 6ft (1.83m) with No Mesh and No Stop (E/M450A Only) C
1001144026 Ref 5ft (1.52m) with No Mesh and No Stop (E/M400A &
E/M450A/AJ) C
3510844 Ref 5ft (1.52m) with No Mesh and With Stop (E/M400AJP Only) E
1001144027 Ref 4ft (1.22m) with No Mesh and No Stop C
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See Section 10 for Mesh Installations.
Ref Note: Replacement Decals Must be Ordered Separately - See
DECAL SECTION.
1 0100040 AR Sealant, Adhesive (Not Shown) (Prior to SN 0300103057)
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
5 3311001 4 Nut #10-24NC - Platform with No Stop Only (Prior to SN
0300077390)
6 See Note 1 Platform Weldment (Note: Not Available - Purchase Platform
Assembly)
7 3520072 1 Cap-Plug
8 Ref Hardware Options:
8 Ref Platform with No Stop:
8 3911008 4 Screw #10-24NC x 1in (Prior to SN 0300077390)
8 3820020 4 Pop Rivet (E/M400) (SN 0300077390 through 0300189901)
8 3820020 4 Pop Rivet (E/M450) (SN 0300077390 through 0300189898)
8 Ref Platform with Stop:
8 3911008 4 Screw #10-24NC x 1in
9 4751000 AR Flatwasher #10 - Platform with No Stop Only (Prior to SN
0300077390)
10 4761000 AR Lockwasher #10 - Platform with No Stop Only (Prior to SN
0300077390)
11 Ref Gate Weldment Options:
11 4846452 1 Gate Weldment (Prior to SN 0300163749)
11 1001144629 1 Gate Weldment (E/M400) (SN 0300163749 through
0300189901)
11 1001144629 1 Gate Weldment (E/M450) (SN 0300163749 through
0300189898)
12 3572413 1 Stop (Platform with Stop Only)
13 0641610 2 Bolt 3/8in-16NC x 1-1/4in (Platform with Stop Only)
14 4711600 4 Flatwasher 3/8in Narrow (Platform with Stop Only)
15 3311605 2 Locknut 3/8in-16NC (Platform with Stop Only)
16 3520198 2 Cap-Plug