2 ending the blanking, Ending the blanking – Eppendorf G0.5 µPlate User Manual

Page 22

Text mode
Original mode

Operation
Eppendorf

μPlate G0.5

English (EN)

5.4.2

Ending the blanking

There are two ways to end the blanking:

1. Repeat the blanking using the same plate but with white wells only (e.g., D1 – E2, as

shown in the figure above). Drag a frame around these wells.

Abb. 5-13:Purple color code

Fig. 5-13:

Purple color code

The newly selected wells appear white; the deviating wells switch from pink to violet.
All other wells remain blue, which indicates that they are not being used.

2. Move the plate out, repeat the cleaning procedure, load the plate with fresh blanking

solution and start the blanking over again.