Eppendorf G0.5 µPlate - Manual (Page 15)

Operation
Eppendorf ® μPlate G0.5
English (EN)
15
5.2.6 Editing sample types
In the "Sample Type" dropdown menu, select the "Others” option. The “Edit Samples”
window opens. The asterisk marks an open row in which additional sample types can be
entered with the corresponding standard coefficients [μg/mL] for 1 cm layer thickness at
260 nm.
For example, a ratio wavelength of 280 nm can be selected from the selection menu.
You can delete samples by clicking on the row and pressing "Delete".
Abb. 5-6:Selecting and adding samples
Fig. 5-6: Selecting and adding samples
The correct filters must always be selected and they must be correctly defined in
the filter carriage. If an unavailable wavelength is selected (because the filter is
not in the slide), an error message appears.