Advance Adapters 716806 - Manual (Page 9)

ADVANCE ADAPTERS INC. P/N: 716806
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 9 OF 10
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-05-10
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
POWER STEERING BOX
LONG TIE ROD
Part No. 716830
CENTER SOCKET TIE ROD END
Part No. 716819 (Left hand thread)
Stock Jeep or our
Part No. 716820
STOCK CLAMPS
SHORT TIE ROD
Part No. 716829
Stock Jeep or our
Part No. 716821
PITMAN ARM
LOCKWASHER & NUT
PITMAN ARM
Part No. 716817
Stock Jeep or our
Part No. 716821
FRAME ENCLOSURES
Part No. 716824
WELDABLE CAST STEEL MOUNTING PLATE
Part No. 716838
FRAME RAIL
POWER STEERING CONVERSION
JEEP UNIVERSAL
NOTE:
This spud shaft couples to the power steering box input
shaft. This kit is supplied with a .800" dia. 36 tooth spud
shaft. Some power steering boxes were equipped with a
.730" dia. 30 tooth input shaft. Applications with this smaller
input will require our
P/N 716834-30 spud shaft.