Advance Adapters 716640 - Manual

ADVANCE ADAPTERS INC. P/N: 716640
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-01-00
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 716635 SPHERICAL BALL (Used with GM cast iron release lever only)
2. 2 716641 CONNECTOR
3. 1 716642 CABLE
4. 1 716644 SPROCKET
5. 2 716645 MASTER LINK
6. 1 716646 BRACKET
7. 1 716647 ROD END
8. 1 716648 HOUSING
9. 1 716649 CHAIN
10. 2 723103 5/16" LOCK WASHER
11. 2 723105 5/16"-18 X 1" H.H.C.S.
12. 2 723131 5/16"-24 NUT
13. 1 723134 5/16"-18 X 1-1/4" H.H.C.S.
14. 1 723141 5/16"-18 NYLON LOCK NUT
15. 2 723701 3/8"-6 NUT
16. 2 723704 3/8" LOCK WASHER
17. 2 723722 3/8"-16 X 1-1/4" H.H.C.S.
18. 2 723735 3/8" FLAT WASHER
19. 1 725008 1/2"-13 X 1-1/2" H.H.C.S.
20. 1 JP001 JEEP INSTRUCTION MANUAL
JEEP CHAIN CONTROL CLUTCH LINKAGE
KIT FOR VEHICLES 1946-70
USING A JEEP ARM USING A GM ARM