Advance Adapters 713015A - Manual

ADVANCE ADAPTERS INC. P/N: 713015A
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-10-10
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
OPTIONAL ITEMS:
Qty Part No. Description
1. 1 713015LA LEFT SIDE MOUNT (Driver's side)
2. 1 713015RA RIGHT SIDE MOUNT (long mount)
3. 8 725003 1/2"-13 FLAT WASHERS
4. 2 725004 1/2"-13 HEX NUTS
5. 4 725005 1/2"-13 NYLON LOCK NUT
6. 4 725008 1/2"-13 x 1-1/2" H.H.C.S.
7. 1 FM001 FORD INSTRUCTION MANUAL
1 713017 Stock Engine Mount
1 716412 Oil Pan & Pickup Tube
1 716084 Oil filter relocation kit
1 717044A or
717044A-NP
Headers
BRONCO II, RANGER 2WD & 1991-94
EXPLORERS TO FORD V8 ENGINE MOUNTS
Rangers 1992 & earlier require one hole to be drilled
on the driver's side for the mount to be installed.
The stock holes on 1993 and newer vehicles are used
to mount our mounts. Mounts installed in a Ranger engine cradle