Advance Adapters 50-3034A User Manual
Kit consists of
KIT CONSISTS OF:
No.
Qty
Part No.
Description
ADVANCE ADAPTERS INC.
P/N: 50-3034A
P.O. Box 247, 4320 Aerotech Center Way
New Item: (01-02)
Paso Robles, CA 93447
PAGE 1 OF 6
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
02-28-14
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
JEEP & SCOUT D300 T/C SHORT TAILHOUSING
32 SPLINE OUTPUT WITHOUT A YOKE
SPECIAL NOTE:
This kit will not work with the
long version tailhousing of the
Dana 300. The long style tail-
housing measures approxi-
mately 4.5", and requires kit #
50-3032 or 50-3033
1.
1
300491
REAR YOKE END PLAY SHIM (3 sizes) (Installed by AA)
2.
1
300513
BEARING, REAR OUTPUT FRONT (Installed by AA)
3.
1
300515
CAGED NEEDLE BEARING (Installed by AA)
This needle bearing must be removed when installing this kit into a Scout.
4.
1
300104P
SPEEDOMETER HOLE PLUG
5.
1
300625
SPEEDO RING GEAR
6.
1
300627
CIRCLIP, SPEEDO RING GEAR
7.
1
300629
SPEEDOMETER RETAINING CLIP
8.
1
300630
O-RING FOR SPEEDOMETER
9.
1
300922
BREATHER, BRASS ELBOW
10.
1
51-3020
CASTING (Installed by AA)
11.
1
52-3000
SHAFT (Installed by AA)
12.
1
716296
THRUST WASHER FOR DANA 300 (Installed by AA)
13.
1
716303
TAPPERED BEARING
14.
4
723730
S.H.C.S. 3/8"-16 x 1-1/4"
15.
1
723713
3/8"-16 x 1.25" STUD BOLT
16.
1
723701
3/8"-16 NUT
17.
1
301403
BOLT- 5/16"-18 x 3/4" H.F.C.S. NON SERRATED W/ND
NOTE: This kit is 1.5" longer than stock.
A