Advance Adapters 7155720 - Manual (Page 2)

715570R
715570M 715585
715576
715580
(2 PLACES)
715584
715583
715581
715582
FJ4404
(4 PLACES)
715579
715589
ADVANCE ADAPTERS INC. P/N: 715572
P.O. Box 247, 4320 Aerotech Center Way New Item: (08/02)
Paso Robles, CA 93447 PAGE 2 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-04-06
TOYOTA L/C TRANSFER CASE TWIN STICK
INSTALLATION OF PART #715585:
This kit requires the installation of a new mode selector shaft into your stock transfer
case. This shaft can be installed with the transfer case still in the vehicle. The mode
shaft is installed into an aluminum housing that is bolted to the front output shaft
housing of the transfer case. This mode shaft housing bolts on using (4) 12mm bolts.
By removing these bolts, the mode housing can be removed from the transfer case.
Set the mode housing on a bench and remove the plug bolt to expose the bolt that
couples the shift fork to the mode shaft. Remove the shift fork bolt through this
access hole. Remove the shifter detent ball and
spring by removing the detent bolt. Remove the
rubber boot from the mode housing and pull the
mode shaft from the housing. Install the new mode shaft through the seal and into the
housing with the detent notches in the correct orientation. Reinstall the shift fork bolt
into the shift fork and new mode shaft. Insert the detent ball, spring and cap into the
housing. Slide the rubber boot back onto the mode shaft. Install the mode housing back
onto the transfer case, making sure to silicone between the surfaces to secure for no
leaks.
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
shift fork bolt
detent ball and spring