Brother MFC 7460DN - Manual (Page 72)

62
IMPORTANT
• To prevent damage to the machine from
static electricity, DO NOT touch the
electrodes shown in the illustration.
• Handle the toner cartridge carefully. If
toner scatters on your hands or clothes,
immediately wipe or wash it off with cold
water.
• We recommend that you place the drum
unit and/or the toner cartridge on a clean,
flat surface with a sheet of disposable
paper or cloth underneath it in case you
accidentally spill or scatter toner.
• To avoid print quality problems, DO NOT
touch the shaded parts shown in the
illustrations.
Note
• Be sure to seal up the used drum unit
tightly in a bag so that toner powder does
not spill out of the unit.
• Discard used consumable according to
local regulations, keeping it separate from
domestic waste. If you have questions,
call your local waste disposal office.
e
Unpack the new drum unit.
IMPORTANT
• To avoid print quality problems, DO NOT
touch the shaded parts shown in the
illustrations.
• Wait to unpack the new drum unit until
immediately before you put it in the
machine. Exposure to direct sunlight or
room light may damage the drum unit.