Advance Adapters 50-9704 - Manual (Page 3)

DAPTERS
DVANCE
51-9 702
GM TRUCK 4SP MODEL SM420 TO
JEEP NP231 T/C LONG STICKOUT
ADVANCE ADAPTERS INC. P/N: 50-9704
P.O. Box 247, 4320 Aerotech Center Way New Item: (11/93)
Paso Robles, CA 93447 PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 12-11-00
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
CAUTION:
The shaft in this kit protrudes from the back side of the
adapter housing. If your original Jeep transmission shaft
was shorter, the new shaft may require shortening.
If you fail to make the necessary shaft adjustment, a pre-
loaded bearing condition will exist causing severe damage
to both the transmission and transfer case. The modifica-
tions are not required on AX15 transmission replacements.
All other applications may need modifications.