Advance Adapters 50-6201 - Manual (Page 3)

DAPTERS
DVANCE
ADVANCE ADAPTERS INC. P/N: 50-6201
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711062-10
Paso Robles, CA 93447 PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 04-04-13
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
FORD NP435 4SPD TRANSMISSION
TO TOYOTA L/C 3SPD TRANSFER CASE
CAUTION:
When installing a new transmission main shaft into the new process case you must make sure
the input shaft is properly pre-loaded for proper bearing and gear clearances. We have
experienced gear seizure in the 3rd area of the transmission shaft due to the improper clearance
from the front input shaft. The 3rd gear to input shaft clearance must be .010" to .015" in order
to avoid severe damages. If this clearance is not obtained, you will find the input shaft
dragging on 3rd gear and creating excessive heat that will cause gear seizure. Refer to ford
service manual for specific instructions on transmission assembly procedures.