Advance Adapters 50-4703 User Manual
Page 4

GM TRUCK 4SPEED MODEL SM465 TO
JEEP 6 SPLINE DANA 18/20
ADVANCE ADAPTERS INC.
P/N: 50-4703
P.O. Box 247, 4320 Aerotech Center Way
New Item: (02/08)
Paso Robles, CA 93447
PAGE 4 OF 5
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
02-06-08
Stock Angle: Pan angle:
33.36
24.38
This shifter style is primarily found on scouts. Customers with this style shifter can
only install the transfer case on the lowest clocking position. Clocking up requires
major shifter modifications or swapping in a different shifter style.
This style shifter can be will allow for installation in any of the three positions. Minor
grinding is necessary on the crossmember mount when clocked furthest down.
This shifter casting has same clearancing problems as first. Trimming to get 45
degrees can be done on either the transfer case or tranny. Modifications on shifter
are required. 30 degrees to 37 degrees can be done without trimming and 45
degrees (WT).
This style shifter requires clearancing when clocking up is desired. Grinding can
be done on either shifter housing or SM465 case.
We are not sure on this transfer case as
it was not available for testing.