Advance Adapters 50-4703 - Manual

ADVANCE ADAPTERS INC. P/N: 50-4703
P.O. Box 247, 4320 Aerotech Center Way New Item: (02/08)
Paso Robles, CA 93447 PAGE 1 OF 5
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 09-30-08
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No.
Description
OPTIONAL ITEMS:
Qty Part No.
Description
1. 1 51-4703 ADAPTER PLATE
2. 1 52-4703 MAIN SHAFT 6 SPLINE
3. 1 716302 BEARING
4. 1 716310 308 TRANSMISSION BEARING
5. 1 716347 THRUST WASHER
6. 1 716348 BEARING SPACER
7. 1 716349 SHAFT SLEEVES
8. 1 716515 GASKET
9. 1 716568 GASKET
10. 2 716660 LARGE MOUNT
11. 2 716661 SMALL MOUNT
12. 2 716662 BOLT SLEEVE
13. 1 723701 3/8"-16 NUT
14. 4 723704 3/8" LOCK WASHER
15. 4 723705 3/8"-24 NUT
16. 8 723731 3/8"-16 x 1"S.H.C.S.
17. 5 723735 3/8" FLAT WASHER
18. 3 723773 3/8"-24 x 2" SET SCREW
19. 1 723774 3/8"-24 x 1.5" SET SCREW
20. 1 723775 3/8"-16 x 1.25" SET SCREW
21. 2 723776 3/8"-24 x .25" SET SCREW
22. 2 724357 7/16"-14 x 3.25" H.H.C.S.
23. 4 724358 7/16" x .120 FENDER WASHER
25. 1 728701 NYLON LOCK NUT
26. 1 728702 WASHER
27. 1 JP001 JEEP INSTRUCTION MANUAL
1 716001 or
716002
T90-T86 BRG. RET.
GM TRUCK 4SPEED MODEL SM465 TO
JEEP 6 SPLINE DANA 18/20