Advance Adapters 50-2706 - Manual (Page 2)

700R TO BRONCO DANA 20 TRANSFER CASE
ADVANCE ADAPTERS INC. P/N: 50-2706
P.O. Box 247, 4320 Aerotech Center Way New Item: (10/96)
Paso Robles, CA 93447 PAGE 2 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 11-15-02
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
715541 shifter bracket
the (6) S.H.C.S. bolts. Rotate the spud shaft to check for proper installation.
When assembling the transmission to the transfer case, DO NOT FORCE the two gear boxes together. If the shaft
is too long, there is the possibility of pre-loading the transmission bearings, causing premature failure. Take the extra
time to make sure that the shafts do not bottom out internally. If there is any interference problem, it may be necessary
to grind the end of the new output shaft to obtain the proper length.
A shifter bracket has been provided for a "T" style T/C shifter handle. Before installing your transmission/transfer case
assembly in your vehicle, check the fit of this linkage bracket. The mounting hardware for the transfer case linkage
has been left out due to the various "T" style linkages being used.