Advance Adapters 50-1700 - Manual (Page 3)

TURBO 400 TO TOYOTA
LAND CRUISER 1980-89 FJ60 (4-SPEED)
ADVANCE ADAPTERS INC. P/N: 50-1700
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711017
Paso Robles, CA 93447 PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-08-14
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams
and other related equipment. These manuals are normally available at automotive dealerships and parts stores.
may need to be replaced with a socket head cap screw.
These modifications can be done with the pan still
attached to the transmission case. The metal pan will
need the corner recessed approximately 1/2". These
modifications should be made prior to assembly into
the vehicle. In order to allow for additional front
driveline clearance, we recommend that the engine
and transfer case be offset to the driver's side on
vehicles having front driveshafts located on the
passenger's side. On Jeep and Toyota Land Cruiser
conversions, this can be approximately 1" offset of
centerline.