Advance Adapters 50-1700 User Manual
Kit consists of
ADVANCE ADAPTERS INC.
P/N: 50-1700
P.O. Box 247, 4320 Aerotech Center Way
Old Part No: 711017
Paso Robles, CA 93447
PAGE 1 OF 3
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
08-08-14
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams
and other related equipment. These manuals are normally available at automotive dealerships and parts stores.
KIT CONSISTS OF:
No.
Qty
Part No.
Description
TURBO 400 TO TOYOTA
LAND CRUISER 1980-89 FJ60 (4-SPEED)
1.
1
51-0700
ADAPTER CASTING (Ref: 711107)
2.
1
51-0800
ADAPTER PLATE (Ref: 711108)
3.
1
52-8300
SPUD SHAFT
4.
1
52-3200
MAIN SHAFT (Ref: 711332)
5.
1
716150
BUSHING/GEAR LOCATOR
6.
1
716301
SEALED BEARING.
7.
1
716507
GASKET
8.
1
716510
GASKET
9.
2
716700
SEAL (NAT. #331107N)
10.
6
723701
HEX NUTS
11.
6
723711
3/8"-16 x 2" STUDS
12.
8
724302
7/16" FLATWASHERS
13.
2
724309
7/16" H.H.C.S.
14.
1
724311
H.H.C.S. 7/16"-14 x 3-1/2" GR 5
15.
2
724312
7/16"-14 x 4" H.H.C.S.
16.
2
724328
7/16"-14 x 1-1/4" H.H.C.S.
17.
1
728703
STOCK SHAFT NUT
18.
1
TLC001
LAND CRUISER INSTR. MANUAL
Vehicles that were equipped originally with a
manual transmission used a sleeve that locates
the gear for the transmission rear bearing and
provides a seal surface. These applications do
not require the use of our spacer P/N 716142.
You must retain this stock gear spacer on these
applications. All other vehicles have the seal
surface on the gear and will need to use the
gear spacer included in this kit.
If your transfer case was coupled to a
manual transmission, Toyota used a single
lip seal in the front of the transfer case. We
recommend changing the seal with a
double lip seal that was used on the stock
automatic applications.
Toyota # 90316-48003