Advance Adapters 50-0902 - Manual

ADVANCE ADAPTERS INC. P/N: 50-0902
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711009-NS
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 03-27-96
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams
and other related equipment. These manuals are normally available at automotive dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
OPTIONAL ITEMS:
Qty Part No. Description
1. 1 51-0301 CASTING (Ref: 711103-NS)
2. 1 52-0900 MAIN SHAFT (1/4" HUB)
(Ref: 711309-NS)
3. 1 52-1300 SPUD SHAFT (Ref: 711313)
4. 1 716501 T10 GASKET SET
5. 1 716568 JEEP T/C GASKET
6. 1 724309 H.H.C.S. 7/16"-14 x 2"
7. 1 725004 HEX NUT 1/2"-13
8. 1 725010 H.H.C.S. 1/2"-13 x 2"
9. 1 725018 1/2"-13 x 3-3/4" STUD BOLTS
10. 1 728701 7/8" LOCK NUT
11. 1 JP001 JEEP INSTRUCTION MANUAL
THICK HUB TRANSMISSION.
BORG WARNER SUPER T10 4-SPD TO
JEEP & SCOUT DANA 18/20
1 716003 CROSSMEMBER
1 715502-NS SHIFTER BRACKET
1 716302 SEALED BEARING
1 715627-NS LINKAGE KIT
1 716001(2) BEARING RETAINER