Advance Adapters 50-0222 - Manual

ADVANCE ADAPTERS INC. P/N: 50-0222
P.O. Box 247, 4320 Aerotech Center Way New Item: (02/98)
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-13-14
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 51-0224 ADAPTER CASTING
2. 1 52-0222 10 SPLINE SPUD SHAFT (29T INTERNAL)
3. 1 716199 RETAINER
4. 1 716301 SEALED BEARING
5. 1 716507 GASKET
6. 8 720046 10mm-1.5 x 40mm S.H.C.S.
7. 2 723735 3/8" FLAT WASHER
8. 2 723739 3/8"-16 x 7/8" H.H.C.S.
9. 5 724303 7/16" LOCKWASHERS
10. 8 724324 7/16" HIGH COLLAR LOCK WASHER
11. 3 724345 7/16"-14 x 5" HEX HD BOLT
12. 2 724349 7/16"-14 x 1-1/2" H.H.C.S.
13. 1 728701 NYLON NUT
14. 1 728702 7/8" FLATWASHER
DODGE NV4500 5 SPEED 29 SPLINE OUTPUT
TO TOYOTA L/C 10 SPLINE
CAUTION:
There are two 3/8" holes located on the side of the adapter for the mechanical shifter linkage. If your vehicle
has a 3 speed vacuum type shifter, these holes are not going to be used. They will need to be plugged with the
hardware provided and small amount of silicone. P/N715532 can be ordered if you have a mechical linkage.