beautypg.com

Chapter 10 – emergency operation, Emergency power system, Lower controls – Snorkel AB80J User Manual

Page 65: Upper controls, Caution

background image

AB80J/AB85J – 0420453

61

If the main hydraulic system fails, the aerial platform

may be lowered and stowed using the emergency power

system. The main and riser booms may be lowered us-

ing the emergency lowering pump. The machine may

be towed if the drive system fails. Refer to Emergency

Power System, Emergency Lowering, or Towing for the

appropriate procedure.

Emergency Power System

The emergency power system can be used to operate

the machine from the lower or upper controls.

Caution

The emergency power system is for emergency low-

ering and stowing only. The length of time the pump

can be operated depends on the capacity of the bat-

tery. Do not use this system for normal operation.

Only use the emergency power system if the main power

system fails.

Lower Controls

Use the following procedure to operate the machine using

the emergency power system from the lower controls.

1. Place the battery disconnect switch in the on position

(refer to Figure 10.1).

Figure 10.1 – Battery Disconnect Switch

2. Place the key in the start switch (refer to Figure 10.2)

and turn the start switch on.

3. Pull the emergency stop button outward.

Chapter 10 – Emergency Operation

Figure 10.2 – Lower Controls

4. Place the controls switch in the lower control posi-

tion.

5. Hold the ground operation switch in the on position

while holding the engine/emergency power switch in

the emergency power position.

6. Hold the appropriate function toggle switch in the

desired direction.

Upper Controls

For the upper controls to be operational:

• the battery disconnect switch must be in the on posi-

tion.

• the start switch at the lower controls must be turned

on.

• the emergency stop button at the lower controls must

be in the on position.

• the control selector switch at the lower controls must

be in the platform position.

Use the following procedure to operate the machine using

the emergency power system from the upper controls.

1. Pull the emergency stop button outward (refer to

Figure 10.3).

2. Turn the start switch on.

Battery Disconnect Switch

Engine/Emergency

Power Switch

Ground

Operation Switch

Start Switch

Control Selector Switch

Emergency

Stop Button