Danger, Electrocution hazard, Chapter 7 – prestart inspection – Snorkel AB80J User Manual

Page 46: Upper controls, Radiator – cummins and gm

Chapter 7 – Prestart Inspection

AB80J/AB85J – 0420453

0072530

0083988

(Platform Welder Option Only)

0420612

Maintain 10 feet minimum clearance from electrical power lines and apparatus.

You must allow for platform sway, rock, or sag.
This aerial device does not provide protection from contact with or proximity to an

electrically charged conductor.
Death or serious injury will result from such contact or inadequate clearance.

DANGER

ELECTROCUTION HAZARD

THIS MACHINE IS NOT ELECTRICALLY INSULATED

0072530

0083988

Upper Controls

• Do not operate this machine unless you are a qualified operator and have read and

thoroughly understand all information given in the Operator’s Manual and on DANGER

and CAUTION signs on this machine.
• Maintain 10 feet minimum clearance from electrical power lines and apparatus.
This machine is NOT electrically insulated.

• Do not exceed the unrestricted platform capacity shown on the platform.

• Do not operate this machine on soft or unstable ground.
• Operate this machine only on a flat level surface.

Death or serious injury can result from not com plying to the follow ing safety rules.

• Perform the PRESTART INSPECTION, in the Operator's Manual, prior to each work shift.

• Platform occupants MUST wear fall restraint attached to lanyard anchor points provided.

• In case of emergency, depress EMERGENCY STOP button. Pull out to reset.
• Do not use boom to lift or push this machine.

• Move controls slowly and deliberately to avoid jerky and erratic platform movement.

0420612

0151410

Radiator – Cummins and GM

0151410