Snorkel MX19-sn18100-19999 - Manual (Page 18)

Page 16 Operation Manual
060570-027 MX 15/19 Labels
L
ABELS
These labels shall be present and in good condition before operating the work platform. Be sure to read,
understand and follow these labels when operating the work platform.
4 067195-001
THIS PLATFORM IS
NOT INSULATED
DIESE ARBEITSBÜHNE
IST NICHT ISOLIERT
CETTE PLATEFORME
N'EST ISOLEE
100102-900
5 100102-900
11 066559-900
066551-950
MAX = 113 kg = MAX = 113 kg = + + 11
12 066551-950
13 101210-000
14 101208-000
030768-001
15 030768-001
INSIDE
INNSEITIG
L'INTERIEUR
107051-900
16 107051-900
17 066556-900
066557-951 066557-951
18 MX19 066557-951
066557-951 066557-952
250 250
18 MX15 066557-952
005223-906
19 005223-906
20 101222-904
21 064936-099
066522-900
22 066522-900
014222-903
23 014222-903
24 101208-001
063255-901
25 063255-901
010076-901
26 010076-901
27 030768-002
28 068635-001
Model______________ Serial number:___________
Machine weight _______kg Mfg. date:_________
Maximum wheel load:________
Maximum allowable incline of machine when elevated:_____deg.
Occupants and equipment must not exceed the rated maximum
load:_____kg Maximum platform occupants: _____
Maximum allowable sIde force on platform:_____N
Maximum platform height:______m
Maximum platform reach:______m
Maximum allowable wind speed: ______m/s=Beaufort scale_____
Maximum hydraulic system pressure:_____bar
Maximum system voltage: _______Vdc
This machine is manufactured to comply with
Machinery directive 89-392/CEE
CAUTION: CONSULT OPERATOR'S MANUAL BEFORE USE.
061205-003
29 061205-003
26,3 kg +
35 062562-951
36 107053-000
IN CASE OF EMERGENCY push emergency stop switch to deactivate all powered functions.
AFTER USE, secure the work platform from unauthorized use by turning the keyswitch off and removing key.
Modifications to the aerial work platform are prohibited or permissible only at the approval by UpRight.
NEVER charge batteries near sparks or open flame. Charging batteries emit explosive hydrogen gas.
To bypass any safety equipment IS PROHIBITED and presents a danger for the persons on the aerial work platform and in its working range.
NEVER use a machine that is damaged, not functioning properly, or has damaged or missing labels.
VERIFY that all labels are in place and legible before using.
INSPECT the machine thoroughly for cracked welds, loose or missing hardware, hydraulic leaks, loose wire connections,
and damaged cables or hoses before using.
NEVER perform service on machine while platform is elevated without blocking elevating assembly.
To extend the height or the range by placing of ladders, scaffolds or similar devices on the platform IS PROHIBITED!
IT IS PROHIBITED to keep the swing gate or liftable bar in an open position when the platform is raised!
Dismantling the swing gate or other railing components IS PROHIBITED! Always make certain that the swing gate is closed
and securely locked!
Climbing up the railing of the platform, standing on or stepping from the platform onto buildings or other structures, IS PROHIBITED!
IF ALARM SOUNDS while platform is elevated, STOP, carefully lower platform. Move machine to a firm, level surface.
NEVER operate the machine when wind speeds exceed this machine's wind rating. Read operator's manual for more details.
OPERATE machine only on surfaces capable of supporting wheel loads.
NEVER operate the machine without first surveying the work area for surface hazards such as holes, drop-offs, bumps, curbs,
or debris; and avoiding them.
DISTRIBUTE all platform loads evenly on the platform.
NEVER exceed the manual force allowed for this machine. Read operator's manual for more details.
The use and operation of the aerial work platform as a lifting tool or a crane IS PROHIBITED!
Exceeding the specified permissible maximum load IS PROHIBITED! Read operator's manual for more details.
THIS AERIAL WORK PLATFORM IS NOT INSULATED! For this reason it is imperative to keep a safe distance
from live parts of electrical equipment!
USE OF THE AERIAL WORK PLATFORM: This aerial work platform is intended to lift persons and his tools as well as the material
used for the job. It is designed for repair and assembly jobs and assignments at overhead workplaces (ceilings, cranes, roof
structures, buildings etc.). All other uses of the aerial work platform are prohibited!
Bedien- und Anzeigeelemente 060570-027 MX 15/19
Betriebsanleitung Seite 41
B
EDIEN
-
UND
A
NZEIGEELEMENTE
Abbildung 2: Bedien- und Anzeigeelemente
1 Schutzschalter
2. Fahrwerk-Schlüsselschalter
3. Heben/Absenken-Schalter für das Fahrwerk
4. Fahrwerk-Notaustaster
5. Betriebsstundenzähler/Spannungsanzeige
1. Lenkschalter
2. Sperrschalter (vorne am
Steuerhebel)
3. Steuerhebel
4. Arbeitsbühnen-
Notausschalter
5. Heben/Fahren-
Wahlschalter
6. Hornknopf
Bedienelemente der Arbeitsbühne
Steuerpult des Fahrwerks