Preface: about this guide, When you finish installing the xserve, About this guide – Apple Xserve (Early 2009) User Manual

Page 5

About This Guide

This setup guide shows you how to install the Xserve

computer in a rack and how to install or replace

components inside the Xserve.

This guide describes the 3rd-generation Intel-based Xserve (early 2009):

For information about unpacking the Xserve and installing it in a rack, see Chapter 1.

For information about installing or replacing drive modules, memory, PCI cards,

power supplies, or the system battery, see Chapter 2.
For a summary of Xserve specifications, see Appendix A.

For safety, maintenance, and regulatory information, see Appendix B.

When You Finish Installing the Xserve

For information about starting up the Xserve for the first time, configuring the server
software, and using the Xserve, see the Xserve User Guide on the Admin Tools disc that
comes with the Xserve.

To learn about the Mac OS X Server software installed on the Xserve, see Mac OS X
Server: Getting Started, also on the Admin Tools disc that comes with the Xserve.

efac