Apple Xserve (Early 2009) - Manual (Page 11)

11 Chapter 1 Installing the Xserve
Operating Environment
Make sure that the ambient temperature in the rack is within the limits established
for the Xserve and all other equipment. For the Xserve operating temperature
requirements, see Appendix A, “Specifications,” on page 45. Make sure that both the
rack itself and the room where the rack is located are sufficiently ventilated to maintain
the necessary temperature range.
Installing the Xserve
Follow these instructions to install the Xserve in an equipment rack.
Installation Summary
Step 1: Remove the shipping material Â
Step 2: Assemble a pair of slide rails that are the right length for your rack Â
Step 3: Install the rails loosely in the rack Â
Step 4: Align and secure the rails Â
Step 5: Slide the Xserve into the rack Â
Step 6: Connect the cables Â
Step 7: Connect a keyboard, display, and mouse (optional) Â
Installing Optional Components Before You Begin
To work inside the Xserve, you need to remove it from the rack. If you plan to install
additional memory, PCI cards, or other internal components before you start using the
Xserve, you might want to do so now. For help installing components, see Chapter 2.