Apple Ethernet CS Twisted-Pair Card - Manual (Page 9)

Setting the Network control panel for
EtherTalk
A Macintosh computer’s network connection is preset for
LocalTalk. To connect to an Ethernet network instead, you
need to change the setting in the Network control panel.
Follow these steps:
1. Choose Control Panels from the Apple ()
menu.
2. Open the Network control panel.
3. Click the EtherTalk connection to select it.
A message asks you to confirm the change of network
connections. You may have more network connection
choices than those shown in the following figure.
4. Click OK to confirm the change of networks.
7
Click the
EtherTalk
connection.
Shows available
zones
You need these
versions or later.
You set your network
connection in the Network
control panel.