Apple Ethernet CS Twisted-Pair Card - Manual (Page 7)

Installing EtherTalk software
To install the correct version of EtherTalk software you
need to use the Installer program on the
Network Software
Installer disk, version 1.4.2 or later, included with your
card.
For safety, make sure that the Installer disk is locked
before you use it. To lock a disk, slide the tab on the back
side so that the square hole is open.
Save the Installer disk after installation in case your
startup disk gets damaged and you need to reinstall
EtherTalk software.
To install EtherTalk software:
1. Insert the Network Software Installer disk in
your Macintosh and double-click the disk’s
icon to open it.
The Apple Ethernet CS Twisted-Pair Card requires
the versions of software supplied on the
Network
Software Installer disk, version 1.4.2 or later.
5
Open the disk to
find the Installer.