Apple Ethernet CS Twisted-Pair Card - Manual (Page 8)

2. Open the Installer program, review the
Welcome screen, and click OK.
3. Make sure that the disk indicated on the
Installer’s dialog box is your current startup
disk, and click Install.
If you see a message indicating that the software
cannot be installed while other programs are running,
click Continue.
4. When you see a message reporting that the
installation was successful, click Restart.
Before you can use services on an Ethernet network,
you need to select the EtherTalk network connection
for your startup disk. The next section shows how.
6
If the correct startup disk is indicated, click to
begin the installation.
If another disk is currently selected, click this
button until the name of your current startup
disk appears.
Name of the disk on which the software will be
installed