Apple Newton Press (Macintosh) - Manual (Page 7)

8 Click the Install button.
The Installer takes a few moments to calculate what needs to be done and
then begins to copy files.
9 When you see a message reporting that installation was successful, click Restart.
Congratulations! You’ve installed the Newton Press application software.
Installation troubleshooting
If the Installer can’t complete the installation, you’ll see a message. Here are
some ways to fix some common problems.
m Make sure that you have the correct hardware or system software. (If you
don’t, the Installer tells you what you’re missing.)
m Make sure you turn off your software extensions as described in the
previous section.
m Make sure you have enough free disk space on your hard disk. If necessary,
drag old files you no longer need into the Trash and empty the Trash to
make more room. The Newton Press application requires 3 MB of free
hard disk space.
Starting Newton Press
Now that you’ve installed the computer software, you must set your computer
software and the Newton PDA to communicate.
Getting your computer ready
After connecting your computer and Newton PDA, you next must open the
application program and indicate the type of connection that you have used.
You don’t need to specify the connection type again unless you change to a
different type of connection later.
7 Getting Started