Apple Newton Press (Macintosh) - Manual (Page 15)

If problems persist, see Chapter 9, “Troubleshooting,” for solutions to
common problems encountered when installing software or installing books
on a Newton PDA.
Quitting Newton Press
When you no longer want to use Newton Press, you can close it and unplug
the Newton PDA from its connection to the computer or network.
To quit the Newton Press application:
m
On your computer, choose Quit from the File menu to close the Newton Press
application.
If you have a book open that you haven’t saved, you see a message asking if
you want to save your work. Click Save to save your work, or Don’t Save to
discard the currently open book.
To unplug the Newton PDA:
1 Turn off the computer.
2 Turn off the Newton PDA and unplug the end of the cable connected to the device.
You can also unplug the cable from the computer, if you want, or leave it
plugged in. If your Newton PDA is connected to a network via a connector
box and cable, disconnect the cable connected to the Newton, but leave the
connector box connected to the network.
15 Getting Started