Apple Macintosh Performa 6400 Series - Manual (Page 16)

What’s next?
Congratulations! You’ve finished setting up your computer. Now continue
with one of the following steps:
m If you are new to the Macintosh, see the next section, “Learning the Basics
in the Performa Tutorials.”
m If you are an experienced Macintosh user, turn to Chapter 2, “Getting
Help,” to learn about Macintosh Guide. Or select Macintosh Guide from
the Guide menu (h) in the upper-right corner of your screen and explore
it yourself.
m If you want to connect other equipment, such as a printer, to your computer,
see Chapter 3, “Connecting Equipment and Expanding Your Computer.”
m If you want to install application software on your computer, see
Chapter 4, “Using Programs and Backing Up Disks.” The chapter contains
information on setting up your programs and managing memory. You’ll
need this information to properly set up any programs specifically designed
for computers with PowerPC microprocessors.
m If you want to turn off your computer, see “Turning the Computer Off”
later in this chapter.
IMPORTANT If you need to turn off your computer at any point, please see
“Turning the Computer Off” later in this chapter. It is very important to use
the correct procedure for shutting down your Macintosh before turning it off.
Before you begin working with your computer, be sure to read the important
health and safety information in Appendix A.
16 Chapter 1
What you can’t find in this manual you can find
in Macintosh Guide, your main source of
information when working with your computer.