Apple Macintosh Performa 6400 Series - Manual (Page 114)

3 To close the tray, push the tray in or press the Open/Close button.
Your Macintosh recognizes the CD-ROM disc as a startup disk, and in a few
seconds the desktop below appears.
Now continue with the steps in “Reinstalling Your System Software” or
“Reinstalling All Your Original Software.”
If you see the Macintosh desktop
1 Press the Open/Close button of your CD-ROM drive to open the CD-ROM tray.
2 Place the Macintosh Performa CD: Performa Software in the tray with the disc label
facing up.
Be sure to use the CD with the words “Performa Software” at the top. Make
sure the disc is lying flat in the tray.
3 To close the tray, push the tray in or press the Open/Close button.
4 Hold down the C key on your keyboard while you choose Restart from the Special menu.
Continue to hold down the C key until you see the “Welcome to Macintosh”
message.
114 Chapter 7
Your screen
may look slightly
different from
this one.