Apple QuickTake 150 (for Windows) - Manual (Page 58)

m To clean the QuickTake camera lens and closeup lens, it is recommended
that you purchase a camera lens cleaning kit from a photographic supply
store. When cleaning your lenses don’t press hard, or you may scratch
them. Never wipe a dry lens.
m If you store the camera for an extended period, remove the batteries. When
you replace the batteries, remember to reset the date and time. (For
instructions, see “Setting the Clock in the Camera” in Chapter 3.)
Solving problems
This section describes some problems you might encounter and offers
solutions you can try.
IMPORTANT If you have a problem with your camera and nothing
recommended here solves it, contact an Apple-authorized service provider.
Camera won’t capture images
m The camera may not be turned on. Make sure the lens cover is open.
m The camera may be asleep. Press the shutter release, or close and then
open the lens cover.
m If you just captured a flash image, the flash may be recharging. Look for
the green light in the viewfinder. When it comes on, the camera is ready to
capture another image.
m The batteries may be low or dead. Replace the batteries or connect the AC
power adapter to the camera.
m The batteries may not be installed correctly. (See “Installing the Batteries”
in Chapter 1.)
WARNING Don’t use solvents or solutions unless they are specifically
designed for cleaning camera lenses. Don’t use chemically treated tissues
intended for eyeglasses.
50 Chapter 5