Apple QuickTake 150 (for Windows) - Manual (Page 32)

Looking at the images in the camera
While the images are in the camera, you can see what they look like and
work with them. (To move them to your computer before you work with them,
see the next section, “Transferring Images to Your Computer.”)
Note: When you work with images on your camera, battery power can
be quickly drained. To conserve battery life, we recommend you use the
QuickTake Battery Booster Pack or connect the camera to an electrical outlet
using the AC Adapter.
1 Connect the camera to your computer.
For instructions, see “Connecting the Camera to Your Computer,” earlier in
this chapter.
2 If necessary, turn on the camera by sliding open the lens cover.
3 On your computer, double-click the QuickTake icon to run the application.
IMPORTANT If your computer reboots when you use the QuickTake software
to communicate with the camera, see Chapter 5, “Maintenance and
Troubleshooting,” for suggestions that may remedy the problem.
4 Choose View Slides in Camera from the Camera menu.
The images appear in a slide table on your computer screen.
For information about what you can do with the images, see “Working With
Your Images,” later in this chapter.
24 Chapter 3