Apple QuickTake 150 (for Windows) - Manual (Page 13)

Installing the batteries
Use the three lithium batteries that came with your camera.
1 Flip open the door to the battery compartment.
2 Insert the batteries into the camera.
3 Close the battery compartment door.
See also: Appendix B, “Battery Information.”
Arrange the ribbon under the batteries so you can use
it to pull them out when you need to replace them.
Position the – and + ends of each
battery as indicated on the door.
2
3
1
WARNING Installing the batteries incorrectly may cause an explosion.
Follow the instructions in this manual to replace the batteries. Use only
three lithium batteries or three NiCad (nickel-cadmium) batteries. Do
not mix different types of batteries in the camera. Mixing batteries may
cause a fire or a small explosion.
5 Getting Started With the QuickTake 150 Camera