Apple AppleVision 750 - Manual (Page 72)

Sound on your AppleVision 750
AV
Display
IMPORTANT Detailed instructions for AppleVision software are provided in
Macintosh Guide (called Mac OS Guide on some computers) and Monitors &
Sound Guide. System 7.1 users can view AppleVision software instructions in
Adobe Acrobat Reader by opening the Monitors & Sound doc.pdf file
(located in the AppleVision Extras folder). For Windows users, detailed
instructions about sound controls are provided in Chapter 4, “Using Your
Monitor With Windows-Based Computers.”
You don’t hear a system beep when you start up your computer.
The speakers on the AppleVision 750 AV monitor do not turn on until the
computer sends a video signal. This occurs after the start up sound has been
generated so you might hear part of the sound, or no sound at all. This is
normal for this monitor and does not indicate a hardware or software
problem.
You don’t hear any sound on your AppleVision 750 AV speakers or headphones.
m Increase the volume. Make sure the volume controls in your computer are
set correctly first. Then use the audio controls on the front panel of the
AppleVision monitor to increase the speaker volume. For Mac OS–based
computers, click the Sound button in the Monitors & Sound control panel
and adjust the volume on your computer; then click the Monitor Sound
button and adjust the monitor speaker or headphone volume. For
Windows-based computers, see Chapter 4 and the manuals that came with
your computer.
m If you have an audio CD player connected to the sound input port on
your monitor, make sure the volume on the audio CD player is set above
minimum. For Mac OS–based computers, make sure you’ve selected
“0 db.” Open the Monitor Sound window of the Monitors & Sound
control panel; then, adjust the sound input Port Gain to “0 db.”
72 Chapter 5