Apple AppleVision 750 - Manual (Page 44)

The following options are available with each button. Some of the options
may not be available with your computer/monitor configuration. See Monitors
& Sound Guide or the Monitors & Sound doc.pdf file for detailed
information on using the AppleVision software.
Button Description
Use the Sound button to choose sound sources for your computer. You can
m select a sound input port on your computer
m set the desired sound output quality
m
set the sound out level
Use the Monitor Sound button to choose sound sources for your monitor. You can
m select a sound input source for your monitor
m
set the desired gain level for best sound quality while recording or playing sound
m
select how the sound from the monitor’s input port is routed through your computer
system
m set the monitor speaker volume, treble, bass, and sound preferences
Tips for using sound controls
m For most Mac OS–based computers, any sound coming from the computer
(from an internal CD-ROM drive, for example) automatically goes to the
computer’s internal speakers and sound output port. The built-in speakers
on your computer are muted automatically when sound equipment (such as
the AppleVision monitor) is connected to the sound output port on the
back of the computer.
m For best results, adjust the volume on your computer with the Sound
controls. Then, use the Monitor Sound controls to adjust the volume on
your monitor.
m If you have more than one monitor attached to your computer, the settings
in the Monitors & Sound control panel apply only to the monitor listed
near the top of the window. The other monitor will have its own Monitors
& Sound control panel.
44 Chapter 3