Apple AppleVision 750 - Manual (Page 21)

Turning the monitor on
To turn on the monitor for the first time:
1 Plug in the computer’s power cord.
2 Press the power button on the monitor.
Note: The power light does not go on until you start up your computer.
3 Start up your computer and wait a few seconds.
The green power indicator light goes on. If the power indicator light does not
go on, press the monitor’s power button again. If this doesn’t work, make sure
you’ve connected the monitor cable and power cord properly. (See
“Connecting the Monitor to Your Computer” earlier in this chapter.) Also,
make sure your computer is turned on and no energy-saving or screen-saving
features are active. The power indicator light on the monitor is off when an
energy-saving program is on.
AppleVision
750
AV Display
Z
®
O ¤
Power indicator light
Power button
21 Setting Up Your Monitor