Apple TV/FM Radio System - Manual (Page 92)

Locking channels: You may want to keep a channel in the
channel list, but restrict access to it. See “Locking and
Unlocking Channels” and “Creating and Changing a
Password” later in this chapter.
Important If you want to use Auto Tune, do so before you
manually add or remove channels. You can use Auto Tune
after you’ve added and removed channels, but doing so
undoes all your previous changes.
Restoring and adding channels
You may want to put a channel back on a channel list—for
example, when a station that was temporarily off the air
resumes broadcasting. Or you may want to add a channel—
for example, when your local cable company adds a new
station to its lineup.
Follow these steps to restore or add a channel to a channel
list:
1 Choose Channel Setup from the Setup menu.
2 Choose from the Connection pop-up menu the connection
for the channel list you want to edit.
Note: You can restore or add channels only in the channel
list for the connection that’s currently chosen. For example,
if you add channel 36 to the antenna channel list, it may still
not be available in the Cable channel list or the HRC Cable
channel list.
3 Click Add.
The Add Channels dialog box appears. If the Add button is
dimmed, all possible channels for the currently selected
signal source are already available.
85 Customizing the TV Tuner Settings