Apple TV/FM Radio System - Manual (Page 127)

m Be sure the volume on your computer is turned up. Use the
volume buttons on the front of your computer if you have
them, or use the sound-related control panel to adjust the
volume. (For more information on adjusting volume, see
Macintosh Guide if it is available on your computer, or the
printed manuals that came with your computer.)
m You may need to broaden the signal range or strength. Make
sure the Apple FM Radio application is active. Open the
Options menu, choose Signal Range or Signal Strength, and
choose “DX” for Signal Range and “All Stations” or “All
Except Weakest” for Signal Strength. For instructions on
choosing a signal range or strength, see Chapter 3,
“Customizing the FM Radio Settings.”
The reception is poor.
m Adjust the FM antenna (connected to the left port on the
TV/FM tuner card). Be sure it is securely connected to the
port and raised high.
The remote control doesn’t work.
m Make sure the remote control has a battery, or try changing
the remote control’s battery.
m Try moving closer to your computer. If you are already very
close to the computer, point the remote control directly at
the remote control receiver on the front of the computer.
m The checkbox labeled Disable Remote Control may be
selected in the Preferences dialog box in your TV
application. Open Apple Video Player and choose
Preferences from the Setup menu. Deselect the Disable
Remote Control checkbox (click to remove the X).
120 Chapter 10