Apple TV/FM Radio System - Manual (Page 91)

Removing channels manually
Although Auto Tune filters out channels that don’t send valid
signals, it doesn’t remove channels that send valid but
scrambled signals (for example, pay-per-view or premium
cable channels). Additionally, there may be channels in your
viewing area that you would simply prefer not to see when
you browse through channels.
Follow these steps to remove channels manually from
channel lists:
1 Choose Channel Setup from the Setup menu.
2 Choose from the Connection pop-up menu the connection
for the channel list you want to edit.
Note: You can remove channels only from the channel list
for the connection that’s currently chosen. For example, if
you remove channel 13 from the antenna channel list, it may
still be available in the Cable channel list or the HRC Cable
channel list.
3 Select the channels you want to remove.
To select several channels in a row, hold down the Shift key
and drag. To select channels scattered throughout the list,
hold down the Shift key and click each channel you want
removed.
You may have to scroll to see all possible choices.
4 Click Remove.
The channels you selected are removed from the channel
list.
84 Chapter 6