Apple TV/FM Radio System - Manual (Page 131)

The Power button on your remote control doesn’t
work.
m You may have left a dialog box open. Close any open dialog
box, then try the Power button again.
You see static or a blank screen when you try to
watch TV or video.
m Be sure your video equipment is securely connected to
the appropriate video input port and your equipment is
turned on.
m Be sure your antenna or cable service is securely connected
to the coaxial port on the TV/FM tuner card.
m You may have the wrong video source selected. Go to the
screen controls in the Controls window and click the
appropriate Video Source button.
m Some static may result from poor reception over an antenna,
or from problems with cable service. Review the instructions
that came with your antenna or cable, or call the supplier for
assistance.
The image is too small or it’s filled with odd
colors.
m The video input standard is set incorrectly. Choose
Preferences from the Setup menu and select a different
setting.
You see a message that the built-in digitizer
cannot display video in the current monitor
setting.
m Reduce the number of colors or levels of gray your monitor
displays, using the control panel for monitors. (For more
information on adjusting a monitor, see Macintosh Guide if
it is available on your computer, or the print manuals that
came with your computer.)
124 Chapter 10