Apple TV/FM Radio System - Manual (Page 31)

4 Using an F-type coaxial cable connector, connect the TV port
on the right, marked by the
icon, to a cable service or to
a TV antenna.
5 Reconnect any cables you disconnected at the start of
this process.
Because you pressed the reset button on the logic board
earlier, some of your computer’s software settings will have
changed (for example, the date and time on your computer
will need to be reset). You may want to open the control
panels for the date and time, keyboard, and mouse to make
sure that they are set the way you want them. For more
information about resetting these options, refer to
Macintosh Guide, available in the Guide (h) menu. (If you
do not have Macintosh Guide on your computer, see the
manual that came with your computer.)
Coaxial cable from an external TV antenna or cable TV service
Attach the coaxial cable to the TV tuner port.
The TV tuner port is marked with the icon.
24 Chapter 1