Apple TV/FM Radio System - Manual (Page 83)

3 Click the video source you want to use:
m If you want to watch TV, click TV.
m If you want to view video from a VCR or other device
that’s attached to the composite video input port, click
Video.
m If you want to view video from a VCR or other device
that’s attached to the S-video input port, click S-Video.
Note: If you’re not sure which port a video device is
attached to, see “Determining Which Video Connector You
Need” in the section “Connecting Other Video Equipment”
in Chapter 1.
The source change takes effect as soon as you make your
choice.
Changing TV channels
When the video source is set to TV and the video window is
active, you can use any of the following methods to change
channels:
m Click the Up or Down arrow on the video window.
m Select a name from the Names pop-up menu on the video
window (if you’ve given names to channels, as described in
Chapter 6).
m Press the Left Arrow key or Right Arrow key on the keyboard.
(Make sure Apple Video Player is the active application, or
these keys won’t have any effect.)
76 Chapter 5