Apple Workgroup Server 9150/120 - Manual (Page 85)

A “sad Macintosh” icon appeared and the server won’t start up.
Your server cannot start up because of a problem with the system software or
the server hardware.
m Eject any floppy disks (or CD-ROM discs) by turning off the server and
then holding down the mouse button while you turn the server on again. Try
starting up with a different startup disk (such as the Workgroup Server
Software CD-ROM disc). If the “sad Macintosh” icon appears again,
consult the service and support information that came with your server for
instructions on how to contact an Apple-authorized service provider or
Apple for assistance.
You see an error message at startup telling you that the system will use the LocalTalk port.
If you will not be using an Ethernet network, you need to change the setting in
the Network control panel from EtherTalk to the appropriate network. See “If
You Need to Switch the Network Connection” in Chapter 2.
The server’s clock keeps time inaccurately.
Your server has a clock that runs continuously. When the computer is turned off,
a battery keeps the clock running. If your clock begins to keep time inaccurately,
have your Apple-authorized service provider replace the battery.
Solutions to common problems 69