Apple Workgroup Server 9150/120 - Manual (Page 27)

Plugging in the server
To plug in the server:
1 Plug the socket end of the server’s power cord into the recessed power plug (marked
with the symbol ≤ ) on the back of the server.
2 Plug the other end of the power cord into a three-hole grounded outlet or power strip.
Choose a power outlet to which you have easy access.
IMPORTANT Be sure at least one end of the power cord is within easy reach so
that you can unplug the server when you need to.
Plug the power cord
into the recessed
power plug.
WARNING This equipment is intended to be electrically grounded. Your
server is equipped with a three-wire grounding plug—a plug that has a
third (grounding) pin. This plug will fit only a grounded AC outlet. This
is a safety feature. If you are unable to insert the plug into the outlet, contact
a licensed electrician to replace the outlet with a properly grounded outlet.
Do not defeat the purpose of the grounding plug!
Plugging in the server 11